WD750BPVT-80HXZT3西数硬盘数据恢复硬盘电路板771692

Sunny

WD750BPVT-80HXZT3西数硬盘数据恢复硬盘电路板771692
西数硬盘接电脑不认,敲盘几下后会停转.

1. Techno mode key
   
2. Techno mode key......................... : Ok
   
3. 
   
4. RAM:
   
5. HDD Info reading........................ : Ok
   
6. Heads number............................ : 4
   
7. Cyl Count............................... : 256
   
8. 
   
9. ROM:
   
10. Read ROM................................ : Ok
    
11. ROM Data size........................... : 256 Kb
    
12. Flash ROM dir reading................... : Ok
    
13. SA regions address...................... : by default
    
14. Module 02 access........................ : Granted
    
15. ROM Modules:
    
16. ROM version............................. : 65.18E
    
17. ROM F/W version......................... : 00650018
    
18. Overlay F/W version..................... : 65.18E
    
19. Servo F/W version....................... : 05.0K
    
20. 
    
21. Heads configuration..................... : by map
    
22. Heads number............................ : 4
    
23. Heads number in use..................... : 4
    
24. Switched off heads...................... : No
    
25. Heads map............................... : 0,1,2,3
    
26. 
    
27. 
    
28. Read ROM
    
29. Into file............................... : <HDD Profile>\Data\ROM\ROM_65-18E_65-18E_05-0K.bin
    
30. ROM Data size........................... : 256 Kb
    
31. Ok
    
32. 
    
33. Read ROM modules
    
34. Into file............................... : <HDD Profile>\Data\ROM
    
35. Module : 0A............................. : Ok
    
36. Module : 0B............................. : Ok
    
37. Module : 30............................. : Ok
    
38. Module : 47............................. : Ok
    
39. Module : 0D............................. : Ok
    
40. Module : 4F............................. : Ok
    

复制代码

Sunny

State sector

		Parameter		Value		Notes
	Common
		Format Version		1
		VSC Implementation, Minor		1
		VSC Implementation, Major		4
		Max Action Code Supported		160
	Last operation
		Last Cmd Type		3		VSC Data CMD
		Last Cmd Register		176		0xB0
		Last VSC Cmd Action Code		0013 / 0x000D		0013 Get Drive Data Tables
		Last Feature Register		213		0x00D5
		Last Sector Count Register		1		0x0001
		Last Sector Number Register		191		0x00BF
		Last Cylinder Register		0xC24F		49 743
		Last LBA High		0x0000
		Last Device Control Register		0x00
		Last Device/head Register		0xA0
		Last Task File Response Reg/Error		0x00/0x00
	Errors
		Extended Error		0x0000		SUCCESS
		Secondary Error Code		0x0000
	Info
		Host Connection Speed		3		SATA GEN2
		APM Level		0x80
		Sectors Xfer Pending to/from drive		0
		Last Task File Data		0
	Status
		Status Flags 1		0x1081
		Bit 0: VSC Command Set		Enabled
		Bit 1: Smart is		Disabled
		Bit 2: Legacy Native Mode		Not supported
		Bit 3: Instability bit is		cleared
		Bit 4: Pending VSC Tx from Drive to Host		[NO]
		Bit 5: VSC Command currently executing in background		[NO]
		Bit 9: At least one DBS event occurred since the last clear DRM		[NO]
		Bit 10: At least one reset-while-busy event occurred since the last clear DRM		[NO]
		Bit 11: Drive is powered up in Standby and has not spun		[NO]
		Bit 13: Drive in Queue Abort Mode		[NO]
		Bit 16: VSC POR Reset Occurred		[NO]
		Bit 17: Power On Reset Occurred		[NO]
		Bit 18: Hardware Reset Occurred		[NO]
		Bit 19: Software Reset Occurred		[NO]
		Bit 20: Debug Stop Occurred		[NO]
		Bit 25: Write Fault Occurred		[NO]
		Bit 26 & 27: Drive Protect State		0		UnLock
		Bit 28: Encryption Key Loaded		[NO]
		Bit 30-31: Offline Pending Status		0		NO OL PENDING
		Current Drive State 1		0x0		Idle
		Current Drive State 2		0x0
		BG DST/Smart OL State		Suspend
		Test Type		0x0		No DST or Smart OL
		Progress Indicator		0x0
		Write Fault LBA		0
	Position
		Current LBA		0
		Current Track Offset		0
		Virtual cylinder of current active track		0
		Virtual head of current active track		0
		Servo Track Offset of current active track		0		(for VDT drives only)
		Virt Servo Cylinder of current active track		0		(for VDT drives only)
		Data-to-Servo Conversion Offset		0		(for VDT drives only)
		Current Data Zone		0
		Current Wedge Start		0
		Current Wedge Size		0
	Temperature
		Drive Temperature (avg)		128
		Junction Temperature (degree)		128
		Flex Temperature (degree)		25
		Coil Temperature		0
	Servo
		Servo Status		0x0080
		Seed Cyl		0
		Seed Head		0
		Seed Sector		0
		Sector Skew		0
		Wedge Skew		0
	Debug
		Debugstop Code		0x0000
	PST Information
		PTM File Id		0x00
		PTM Test Id		0x00
		Current VSC Command		0x0D
	PTM
		PTM Status		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Sunny

HDD info report

		Parameter		Value		Notes
	General
		Version		0x0002
		Controller firmware revision		65.18E
		Servo firmware revision		05.0K
		Overlay firmware revision		65.18E
		Surface format revision		A1.034
		Read channel firmware revision		G.00011A
		Drive type		Mobile 2.5 Inch
		Interface type		Serial ATA
		PCBA type		Entek rev 0
		ROM type		Serial Flash
		Flash size (page size)		256 (4) kB
		DRAM size (allocated)		16384 (14543) kB
	Drive Parts Information
		Controller chip vendor		0x0000
		Controller chip revision		0x7412 88i9146B2
		MicroP vendor		0x0000
		MicroP revision		0x7412
		Channel chip vendor		0x0039
		Channel chip revision		0x0023
		Preamp vendor		0x0000
		Preamp revision		0x0009
		Power chip vendor		0x0000
		Power chip revision		0x0000
	Drive Build Information
		Product ID (Ext)		0x16FE (0x012D)
		Model		WDC ROM MODEL-ZEPHYR_N
		Serial number		WDC-ROM SN# XYZ----
		DCM
		Original built date
		Reconfiguration date
		Drive platters		2
		Physical heads		4
		Virtual heads		4
		Depop bit map		0x0F
		Zones		21
		Servo wedges		248
		Negative cylinders		256
		Spindle RPM		5400
		User cylinders		0
		Cylinder wedge skew		33
		Head skew		78
		Cluster skew		112
	Error Correction Information
		No. of interleaves in OTF		4
		Number of ECC + CRC Bytes		245
		No. of bytes(symbols) corrected by OTF		26(20)
		No. of bytes(symbols) corrected by FW		185(148)
		Feature flags		0x0DC0FBB6
	Jumper Settings
		Jumper setting value		0x0000
		Master jumper		OFF
		Slave jumper		OFF
		CSEL jumper		OFF
	ReloList File Information
		Number of relocations		0
		Number of tares		0
		Number of Ftares		0
		Max remaining possible relos		0
		Number of consumed spares		0
		Last LBA of spare pool		366 401 952
	Drive Format Information
		Tracks per inch (in KTPI)		0
		Area Density in 100MB (per platter)		0
		Format Type(0)		primary format
	SATA IPM Timers
		Partial		5 ms
		Slumber		100 ms